Exploring Effects of Chitosan Oligosaccharides on the DSS-Induced Intestinal Barrier Impairment In Vitro and In Vivo

Intestinal barrier dysfunction is an essential pathological change in inflammatory bowel disease (IBD). The mucus layer and the intestinal epithelial tight junction act together to maintain barrier integrity. Studies showed that chitosan oligosaccharide (COS) had a positive effect on gut health, effectively protecting the intestinal barrier in IBD. However, these studies usually focused on its impact on the intestinal epithelial tight junction. The influence of COS on the intestinal mucus layer is still poorly understood. In this study, we explored the effect of COS on intestinal mucus in vitro using human colonic mucus-secreted HT-29 cells. COS relieved DSS (dextran sulfate sodium)-induced mucus defects. Additionally, the structural characteristics of COS greatly influenced this activity. Finally, we evaluated the protective effect of COS on intestinal barrier function in mice with DSS-induced colitis. The results indicated that COS could manipulate intestinal mucus production, which likely contributed to its intestinal protective effects.     

治疗非小细胞肺癌脑转新药:Zorifertinib

新药Zorifertinib是阿斯利康公司针对非小细胞肺癌(NSCLC)脑转研发的一种表皮生长因子酪氨酸激酶抑制剂(EGFR-TKI),对EGFR 19外显子缺失和EGFR 21外显子L858R突变有高选择性和高抑制性,相较于其他EGFR-TKIs的突出优势是具有优秀的血脑屏障渗透性。临床研究表明Zorifertinib可以在脑内达到等同血浆的药物浓度,有效抑制脑内肿瘤生长,减少脑内肿瘤面积,并且预防脑内肿瘤形成。本文将对该新药的作用机制、研发历程、药代动力学、临床研究和安全性进行综述,为广大研究者以及今后的临床应用提供参考。     

Synthesis of a Novel Chitosan/Basil Oil Blend and Development of Novel Low Density Poly Ethylene/Chitosan/Basil Oil Active Packaging Films Following a Melt-Extrusion Process for Enhancing Chicken Breast Fillets Shelf-Life

An innovative process for the adsorption of the hydrophobic Basil-Oil (BO) into the hydrophilic food byproduct chitosan (CS) and the development of an advanced low-density polyethylene/chitosan/basil-oil (LDPE/CS_BO) active packaging film was investigated in this work. The idea of this study was the use of the BO as both a bioactive agent and a compatibilizer. The CS was modified to a CS_BO hydrophobic blend via a green evaporation/adsorption process. This blend was incorporated directly in the LDPE to produce films with advanced properties. All the obtained composite films exhibited improved packaging properties. The film with 10% CS_BO content exhibited the best packaging properties, i.e., 33.0% higher tensile stress, 31.0% higher water barrier, 54.3% higher oxygen barrier, and 12.3% higher antioxidant activity values compared to the corresponding values of the LDPE films. The lipid oxidation values of chicken breast fillets which were packaged under vacuum using this film were measured after seven and after fourteen days of storage. These values were found to be lower by around 41% and 45%, respectively, compared with the corresponding lipid oxidation values of pure LDPE film.     

Interband and intraband radiation from the n-InGaAs/GaAs heterostructures with quantum wells under the conditions of injection in high lateral electric fields

The interband and intraband radiation from the n-InGaAs/GaAs heterostructures with the double and triple tunnel coupled and selectively doped quantum wells (QWs), which is appeared under the lateral electric field and in the presence of hole injection from the anode contact, has been investigated. A steep increase of the interband radiation intensity was found at the fields of E≥1.7 kV/cm. This effect should be related to the big lifetime of the injected charge carriers (~10⁻⁶ s) which exceeds by three orders of magnitude the lifetime in the similar bulk direct-band semiconductor. Its reason lies in spatial separation of the injected holes and electrons between coupled wells, firstly, by the built-in transverse electric field between wells and, secondly, due to the real-space transfer of carriers heated by the lateral electric field from the wide well to the narrow δ-doped one. Furthermore, an increase of the carrier concentration due to injection leads to an increase of that transition intensity and, consequently, to an intensity increase of the radiative intersubband transitions of carriers in QWs which results in a steep intensity increase of the far (50–120 µm) infrared radiation.     

A novel nanoscale fin field effect transistor by amended channel: Investigation and fundamental physics

The present paper proposes a new Fin Field Effect Transistor (FinFET) with an amended Channel (AC). The fin region consists of two sections; the lower part which has a rounded shape and the upper part of fin as conventional FinFETs, is cubic. The AC-FinFET devices are proven to have a lower threshold voltage roll-off, reduced DIBL, better subthreshold slope characteristics, and a better gate capacitance in comparison with the C-FinFET. Moreover, the simulation result with three-dimensional and two-carrier device simulator demonstrates an improved output characteristic of the proposed structure due to reduction of self-heating effect. Due to the rounded shape of the lower fin region and decreasing corner effects there, the heat can flow easily, and the device temperature will decrease. Also the gate control over the channel increases due to the narrow upper part of the fin. The paper, thus, attempts to show the advantages of higher performance AC-FinFET device over the conventional one, and its effect on the operation of nanoscale devices.     

Dielectric properties of tetragonal tungsten bronze films deposited by RF magnetron sputtering

Tetragonal tungsten bronze (TTB) films have been synthesised on Pt(111)/TiO₂/SiO₂/Si substrates from Ba₂LnFeNb₄O₁₅ ceramics (Ln = La, Nd, Eu) by RF magnetron sputtering. X-ray diffraction measurements evidenced the multi-oriented nature of films with some degrees of preferential orientation along (111). The dependence of the dielectric properties on temperature and frequency has been investigated. The dielectric properties of the films are similar to those of the bulk, i.e., ε ∼150 and σ ∼10⁻⁶ Ω⁻¹ cm⁻¹ at 1 MHz and room temperature. The films exhibit two dielectric anomalies which are attributed to Maxwell Wagner polarization mechanism and relaxor behaviour. Both anomalies are sensitive to post-annealing under oxygen atmosphere and their activation energies are similar E_a ∼0.30 eV. They are explained in terms of electrically heterogeneous contributions in the films.     

Probing the Rotational Dynamics of meso‐(2‐Substituted)aryl Substituents in A2B‐Type Subporphyrins

A₂B‐type B‐methoxy subporphyrins 3 a – g and B‐phenyl subporphyrins 7 a – c , e , g bearing meso‐(2‐substituted)aryl substituents are synthesized, and their rotational dynamics are examined through variable‐temperature (VT) ¹H NMR spectroscopy. In these subporphyrins, the rotation of meso‐aryl substituents is hindered by a rationally installed 2‐substituent. The rotational barriers determined are considerably smaller than those reported previously for porphyrins. Comparison of the rotation activation parameters reveals a variable contribution of ΔH^≠ and ΔS^≠ in ΔG^≠. 2‐Methyl and 2‐ethyl groups of the meso‐aryl substituents in subporphyrins 3 e , 3 f , and 7 e induce larger rotational barriers than 2‐alkoxyl substituents. The rotational barriers of 3 g and 7 g are reduced by the presence of the 4‐dibenzylamino group owing to its ability to stabilize the coplanar rotation transition state electronically. The smaller rotational barriers found for B‐phenyl subporphyrins than for B‐methoxy subporphyrins indicate a negligible contribution of S_N1‐type heterolysis in the rotation of meso‐aryl substituents.     

Partially crystallized Pd nanoparticles decorated TiO2 prepared by atmospheric-pressure cold plasma and its enhanced photocatalytic performance

TiO2 decorated with partially crystallized Pd nanoparticles （Pd/TiO2-P） was successfully prepared by atmospheric-pressure dielectric barrier discharge cold plasma. The XRD and XPS analyses proved that Pd ions were reduced to partially crystallized metallic Pd nanoparticles in Pd/TiO2-P. The XPS spectra also indicated that an enhanced metal-support interaction was formed due to the existence of partially crystallized Pd nanoparticles with lower coordination number in Pd/TiO2-P. Photocatalytic activity of Pd/TiO2-P was much higher than that of TiO2 samples decorated with well crystallized Pd nanoparticles.     

Device for non-disruptive taking of melt samples from a compounding process and direct injection molding

A concept for taking a sample from a polymer melt stream plus the direct processing of this melt to specimen is presented. Therefore, a melt sampling and direct injection molding (MSIM) device was developed. Process parameters were studied and the set-up was implemented successfully. Using the MSIM device, different thermoplastics were processed and provided specimen characterized. The mechanical material properties from samples of the MSIM process show a good consistency compared with data from conventional processes. The MSIM device can be used in production processes for quality control, e.g. color or mechanical properties, as well as in the field of research and development to reduce development cycles.